Showing 49–64 of 2054 results
Actisense NMEA 2000 Gateway (NGW-1-USB) NGW-1-USB The Actisense NGW-1 NMEA 2000 Gateway is the easiest way to link between a boats old and new data networks. The NGW-1 can convert NMEA 0183 data into NMEA 2000 data and vice-versa. The NGW-1 is available to purchase in a variety of options: NGW-1-ISO is the standard option….
Actisense NMEA 2000 Network Block, 6 screw terminal drops, power feed and diagnostic features (QNB-1) QNB-1 The Actisense QNB-1 provides instrument drops for up to six NMEA 2000 devices offering a flexible alternative to multiple T-pieces and reducing the cost of an NMEA 2000 installation. The QNB-1 is available in two versions: The QNB-1-PMW version…
Actisense NMEA 2000 Network Kit (A2K-KIT-2) A2K-KIT-2 Micro starter kit – contains MPT-1, TER-F, TER-M, T-MFF(x2) TDC-6M
A2K-KIT-3 NMEA 2000® Starter Kit An expandable solution for smaller boat users that wish to install an NMEA 2000 network. Installing small NMEA 2000 networks is quicker and easier than it’s ever been with this NMEA 2000 Starter Kit (A2K-KIT-3) from Actisense. The equivalent of four T-pieces in a single case provides a significant time and…
Actisense NMEA 2000 Power Tap (A2K-MPT-1) A2K-MPT-1 Micro male & female connectors, 3 metre UL certified cable, left and right power feed pairs
Actisense NMEA 2000 Small Boat Network (A2K-SBN-1) A2K-SBN-1 Actisense NMEA 2000 Small Boat Network Installing small NMEA 2000 networks is quicker and easier than it’s ever been with the Small Boat Network (SBN) from Actisense. The equivalent of four T-pieces in a single case provides a significant time and space saving with no more…
Actisense NMEA Autoswitch (NDC-4-ASW) NDC-4-ASW Flexible and powerful enough to be the heart of a simple system, or one of many Actisense products in a more complex system. The Actisense NDC-4 allows up to five NMEA 0183 sources to be multiplexed into a single stream*. Two flexible ISO-Drive outputs allow two different downstream talker baud…
Actisense Professional NMEA Multiplexer (PRO-MUX-1-BAS-S) PRO-MUX-1-BAS-S The PRO-MUX-1 is reliable, robust and provides industry leading isolation on all inputs and outputs as standard, so that connected devices safely avoid hazardous ground loops, the number 1 cause of product failure in NMEA 0183 networks. The eight NMEA 0183 inputs can be routed to any of the…
Actisense Rear panel mount wired, 5 pin micro female (A2K-PMW-F) A2K-PMW-F Rear panel mount wired, 5 pin micro female
Actisense Serial Adaptor Cable (OPTO-4) OPTO-4 The Actisense OPTO-4 is a bi-directional interface cable which provides a safe method of connecting an NMEA 0183 system to a standard 9-pin port serial port (RS232). The isolation protects the connected device, so any potentially hazardous voltages on the NMEA 0183 bus do not cause damage to the…
Actisense USB KIT (USBKIT-REG) USBKIT-REG Serial to USB cable assembly Note: this accessory is only suitable for use with Actisense NMEA 0183 range products. To safely transfer NMEA 0183 data to a PC from another manufacturers device, the Actisense USG-2 is recommended.
Actisense USB To Serial Adapter for use with PRO range products (USBKIT-PRO) USBKIT-PRO Serial to USB cable assembly Note: this accessory is only suitable for use with Actisense PRO range products. To safely transfer NMEA 0183 data to a PC from another manufacturers device, the Actisense USG-2 is recommended.
Actisense USG-2 USB Cable (USG-2CABLE) USG-2CABLE USB cable accessory for use with the Actisense USG-2. Note: The USG-2 ships with this cable included in the box but it is also available as an accessory in case a replacement is needed.
Actisense W2K-1 NMEA 2000 to WI-FI Gateway W2K-1 It transfers data from an NMEA 2000 backbone to any device (e. g. laptop, tablet or smartphone) connected to it via Wi-Fi. It has built-in conversion of NMEA 2000 messages into NMEA 0183 sentences thus allowing a wide variety of vessel data (e. g. position, speed, course,…
Active Imaging 2 in 1 transducer for Lowrance / SIMRAD (25ft cable) 000-14490-001 Active Imaging transducer for Lowrance / SIMRAD Active Imaging Transducers Active Imaging is a new scanning sonar technology that provides incredibly detailed, high resolution imaging sonar without sacrificing any range Active Imaging transducers accomplish this by better directing the SideScan beams which…
Active Imaging 3 in 1 Transducer for Lowrance / SIMRAD (25ft cable) 000-14489-001 Active Imaging transducer for Lowrance / SIMRAD Active Imaging Transducers Active Imaging is a new scanning sonar technology that provides incredibly detailed, high resolution imaging sonar without sacrificing any range Active Imaging transducers accomplish this by better directing the SideScan beams which…
No products in the cart.